'color'

Nihon Needs International Company provide a product - the Cooling Fan Jacket Inbuilt. This jacket is designed to provide a comfortable and cool experience to the user, especially during hot summer months. The jacket has a built-in fan system that can be controlled through a remote, allowing the user to adjust the fan speed according to their preference. The fan system is powered by a rechargeable battery, which can last for up to 8 hours on a single charge. The jacket is made of lightweight and breathable material, making it perfect for outdoor activities such as hiking, camping, and sports. The cooling effect of the jacket can help to regulate body temperature and prevent overheating, making it an ideal choice for those who work in hot environments or suffer from heat-related health issues. The jacket is available in a range of sizes and colors, ensuring that there is an option for everyone. With its innovative design and practical functionality, the Cooling Fan Jacket Inbuilt is sure to be a hit among consumers looking for a comfortable and cool experience during the summer months. Nihon Needs International Company has once again demonstrated its commitment to creating innovative products that improve the quality of life for its customers. 1- It is a full set that you can use as a Vest immediately. 2- An inner pad with ultra-three-dimensional 3D mesh can be attached to the inside of the vest, so it will not collapse even when worn under a full harness, and the wind will pass firmly to the neck. 3- There are 3 modes, strong, medium, and weak, that can be adjusted to the scene. 4- It is a large-capacity battery that can fully meet the working hours of the day. Use: - Measures against heat stroke Best type of work clothes with fan

Nihon Needs International provide Japanese Industrial Items that is renowned for its innovative products that enhance the quality of life of its customers. One of its latest products is the Neck Air Cooler set with mask, a device that is designed to keep the wearer cool and comfortable during hot and humid weather conditions. This innovative product has been developed in response to the growing need for effective cooling solutions that are both portable and efficient. The Neck Air Cooler set with mask is an ideal product for people who live in regions with high temperatures or humidity levels. The product is designed to be worn around the neck and is equipped with a powerful fan that blows cool air directly onto the wearer's face and neck. The product also comes with a comfortable mask that is designed to cover the nose and mouth, providing the wearer with protection from airborne pollutants and allergens. The Neck Air Cooler set with mask is a versatile product that can be used in a variety of settings. It is perfect for people who work outdoors or engage in outdoor activities such as hiking, camping, or cycling. It can also be used by people who work in hot and stuffy environments such as factories or construction sites. The product is lightweight and portable, making it easy to carry around and use whenever needed. One of the key benefits of the Neck Air Cooler set with mask is its energy efficiency. The product is powered by a rechargeable battery, which means that it can be used for extended periods of time without the need for constant charging. This makes it an ideal product for people who are always on the move and need a reliable and efficient cooling solution. Overall, the Neck Air Cooler set with mask is a must-have product for anyone who wants to stay cool and comfortable during hot and humid weather conditions. Its innovative design, energy efficiency, and portability make it an ideal product for a wide range of applications. Nihon Needs International has once again demonstrated its commitment to providing innovative products that enhance the quality of life of its customers. 1- It is a set product with 3 neck coolers and a splash infection countermeasure mask. 2- Mode: Strong mode / Weak mode / Fluctuation mode 3- Cooling plate temperature guideline: Strong mode: -10 to -17 ° C from outside temperature, Weak mode: -4 to -8.5 ° C from outside temperature (when measuring at an outside temperature of 35 ° C, the temperature may change depending on the usage environment) 4- Set contents: FRZGRT2RSPWH x 3, 900135 x 1 5- Color: white 6- Size: Neck circumference minimum approx. 37 cm-maximum approx. 50 cm

Nihon Needs International is a leading company in Japan that specializes in providing high-quality industrial products and services. One of their key products is the PISCO Tube Fitting Chemical, which is an innovative solution for ensuring leak-free connections in various types of tubing systems. This product is designed to be highly reliable, durable, and resistant to chemical and environmental factors, making it ideal for use in a wide range of industrial applications. The PISCO Tube Fitting Chemical is specifically designed to provide a strong and secure connection between tubing and other components in a system. This product features a unique design that ensures a tight seal between the tube and the fitting, preventing leaks and ensuring efficient operation. The fitting is made from high-quality materials that are resistant to corrosion and other environmental factors, making it suitable for use in harsh industrial environments. Additionally, the PISCO Tube Fitting Chemical is easy to install and requires minimal maintenance, which helps to reduce downtime and increase productivity. One of the key advantages of using the PISCO Tube Fitting Chemical is its ability to maintain a secure connection even in applications where there is high pressure or extreme temperature conditions. This is due to the fact that the fitting is designed to expand and contract with the tube, ensuring that it remains securely in place even under the most challenging conditions. Additionally, the PISCO Tube Fitting Chemical is compatible with a wide range of tubing materials, making it a versatile solution that can be used in many different applications. Overall, the PISCO Tube Fitting Chemical is an innovative and reliable solution that can help to improve the efficiency and effectiveness of various industrial systems. As a trusted provider of this product, Nihon Needs International is committed to delivering the highest quality products and services to its customers. Whether you are looking for a solution to improve the performance of your existing systems or are looking to upgrade your tubing connections, the PISCO Tube Fitting Chemical is an excellent choice that can provide long-lasting results. All polyphenylene sulphide (PPS) resin fittings are best suitable for applications with chemicals. These fittings, made of all PPS (except the seals), possess excellent heat and chemical resistance and are noncombustible. The seal is made of fluorine rubber, to meet a wide variety of applications. No need to worry about rust because the fitting is all resin made. Non-lubricated specification is suitable for food related application. The weight is about 1/3 of standard fittings. Sealing materials: Fluorine, EPDM or NBR Warning 1- Check chemical resistance before using the products, when the fluid medium is chemicals, solvent or mixed gases. Depending on the conditions, it may cause damage to the products, the escape of tubes, and a fluid leakage. 2- When the fluid medium is water or liquid, do not use fittings unless the operating environment meets all the described specifications in the catalog. Otherwise, it may cause damage to the products, the escape of tubes and a fluid leakage. 3- This series has seal rubber material options, but there is no way to identify between each material. Store each product properly not to mix up, after opening their packages. Caution 1- PPS resin has a characteristic of color change by being exposed to sunlight, fluorescent light, mercury lamp, high temperatures and etc. for a long term. There is no problem on the product performance for the color change. 2- Taper thread is not coated with Sealock. When coating the thread with seal tape or sealant, do not coat 1.5 to 2 screw ridges from the tip of the thread. See below figure.. 3- Tighten taper thread by hand until it stops, then use a spanner to tighten it about 2 or 3 more turns. Excessive tightening may break the thread part. Inadequate tightening may cause a loosened thread or a fluid leakage. 4- Resin type taper thread may have a fluid leakage or get loosened caused by “creep phenomena”, due to a long term use of the thread. Check the tightening condition periodically and re-torque the thread in case of leaks. If re-torque of the thread does not solve a leakage problem, change it to a new product. 5- Due to the resin-made collet, there is a possibility that the hard type tubes and the stem type of non-Chemical Series may have a problem of escape. Verify the matching of connections before using the products. 6- Unequal Union Stem (APIG) is the specialized stem type for Tube Fitting Chemical Series only. Since PPS of this series contains 30% of GF (glass fiber), it may have a problem of escape with non-Chemical Series. 7- Tube insertion into this product is tighter than that of Tube Fitting Standard Series due to its oil-free specification. Make sure to insert tube up to tube end. When inserting a tube, put a liquid like water on the tube, which does not affect the product and the tube. It will improve the smoothness of tube insertion. 8- The seal rubber material EPDM is not suitable for general air pipings, due to its inferior durability against mineral oil. Warnings 1- Make sure to follow the instructions below when the fluid medium is water or liquid. 2- Surge pressure must be controlled lower than max. operating pressure when using water or liquid as a fluid medium. 3- Tap water in Japan free from foreign substances or contamination can be used. Carry out the evaluation under an actual operating condition for using other kind of water. 4- Be sure to place Insert Ring (WR) into the tube edge when using water or liquid as a fluid medium. 5- The specification above may not be applied, depending on the kind of chemicals or mixed gases used as fluid medium. Make sure to use PISCO products after verifying their suitability on the user side.

Nihon Needs International is a leading company in the industrial equipment and machinery market, and one of their most sought-after products is the UHT Pneumatic Turbolap TLL-07. This industrial item is a state-of-the-art machine that is designed to meet the high demands of modern manufacturing processes. The UHT Pneumatic Turbolap TLL-07 is a precision tool that is used for polishing and finishing a wide range of surfaces, including metals, ceramics, and glass. The machine's advanced technology allows for fast and efficient finishing of parts, and it is particularly well-suited for use in the aerospace, automotive, and medical industries. The UHT Pneumatic Turbolap TLL-07 is a versatile tool that can be used for a variety of applications. The machine is equipped with a high-speed turbine that provides the necessary power to achieve a smooth and consistent finish. The UHT Pneumatic Turbolap TLL-07 is also designed to be easy to use, with a simple and intuitive control panel that allows operators to quickly adjust the speed and pressure of the machine to meet their specific needs. One of the key benefits of the UHT Pneumatic Turbolap TLL-07 is its reliability. This machine is built to last, with high-quality components and a sturdy construction that ensures it can withstand the rigors of daily use. The UHT Pneumatic Turbolap TLL-07 is also designed to be easy to maintain, with simple cleaning and lubrication procedures that help to extend the life of the machine and keep it running smoothly. Overall, the UHT Pneumatic Turbolap TLL-07 is an essential industrial item for any business that requires precise and efficient finishing of parts. Nihon Needs International is proud to offer this cutting-edge machine to customers around the world, and their commitment to quality and customer service ensures that every customer receives the support they need to get the most out of their UHT Pneumatic Turbolap TLL-07. Whether you are a small business or a large corporation, the UHT Pneumatic Turbolap TLL-07 is an investment that will pay off in increased productivity, improved quality, and greater customer satisfaction. What is TurboLap? UHT's Turbolap is a small polishing tool driven by compressed air. Unlike our micro grinders, the turbine-powered TurboLap tools reciprocate, which might remind you of the movement of a toothbrush. Not being very versatile, they are specialized for polishing molds. Using the Turbolap tools for unintended purposes may damage them. Refer to the intended use below before using the tools. Features The delicate, tight stroke mechanism by means of direct power transmission Outstanding working efficiency achieved by the high-torque air turbo mechanism Heatless, highly efficient drive Fine control of the speed by means of air regulation Ergonomic soft grip with a good fit Color-coded by type and stroke for easy recognition Suitable for Lapping, polishing, honing, and carving of molds and precision parts Polishing of dental crafts and jewelry

Panel cutout 16mm, easy replacement and adding of contacts The 16mm dia. series of compact size pushbuttons are 'finger-size',and consequently take up little panel space. AH165-2 series operators are about twice as large as the AH164 and AH165 series operators for easier operation. With many types of operator available, the most suitable switch can be identified by color, shape and legend, and have a smooth, quality "snap-action". In spite of their small size they have a highly reliable mechanism, and are eminently suited for solid state and other electronic circuits.