pneumatic fittings

Nihon Needs International, a company, has Joint-venture with Ihara Science to provide their customers with the latest welding technology - Automatic Weld Fitting (AWF). This technology is an innovative solution that is designed to make welding faster, more accurate, and more efficient. The AWF technology is based on a unique fitting system that automatically connects and welds pipes without requiring any manual intervention. This means that the AWF technology can help to improve the quality and consistency of welded joints, while also reducing the risk of human error. The AWF system is capable of welding pipes of various sizes and shapes, including round, square, and rectangular pipes. The system uses an advanced algorithm that calculates the optimal welding parameters for each joint, including the welding speed, temperature, and pressure. This ensures that each joint is welded with the highest level of precision and accuracy, resulting in a stronger and more durable joint. The AWF technology is also highly efficient, with a high welding speed and a low energy consumption. This means that the system can help to reduce production time and costs, while also minimizing the environmental impact of welding. Furthermore, the AWF system is easy to use and requires minimal training, which makes it an ideal solution for companies of all sizes. Nihon Needs International is committed to providing its customers with the latest and most innovative technologies, and the partnership with Ihara Science is a testament to this commitment. With the AWF technology, Nihon Needs International is able to offer its customers a superior welding solution that is fast, accurate, and efficient. This technology is ideal for a wide range of applications, including manufacturing, construction, and infrastructure projects, and is sure to become an essential tool for companies that value precision and efficiency in their welding processes. Features: - 1- The two standard material are single melt material and double melt material. 2- Dimensional tolerances are held to minimum by precision machining. 3- After precision washings, fittings are sealed in high purity nitrogen gas and packed in double in a clean room. 1- Fittings and valves manufactured by Ihara Science are parts for optimum piping. 2- Our “optimum piping system” considers the functionality such as durability and design of the entire piping system including these parts, as well as its cost, handling, and environmental burden. 3- We provide the system properly as a total solution including design, processing, assembly, and maintenance.

Nihon Needs International is a leading company in Japan that specializes in providing high-quality industrial products and services. One of their key products is the PISCO Tube Fitting Chemical, which is an innovative solution for ensuring leak-free connections in various types of tubing systems. This product is designed to be highly reliable, durable, and resistant to chemical and environmental factors, making it ideal for use in a wide range of industrial applications. The PISCO Tube Fitting Chemical is specifically designed to provide a strong and secure connection between tubing and other components in a system. This product features a unique design that ensures a tight seal between the tube and the fitting, preventing leaks and ensuring efficient operation. The fitting is made from high-quality materials that are resistant to corrosion and other environmental factors, making it suitable for use in harsh industrial environments. Additionally, the PISCO Tube Fitting Chemical is easy to install and requires minimal maintenance, which helps to reduce downtime and increase productivity. One of the key advantages of using the PISCO Tube Fitting Chemical is its ability to maintain a secure connection even in applications where there is high pressure or extreme temperature conditions. This is due to the fact that the fitting is designed to expand and contract with the tube, ensuring that it remains securely in place even under the most challenging conditions. Additionally, the PISCO Tube Fitting Chemical is compatible with a wide range of tubing materials, making it a versatile solution that can be used in many different applications. Overall, the PISCO Tube Fitting Chemical is an innovative and reliable solution that can help to improve the efficiency and effectiveness of various industrial systems. As a trusted provider of this product, Nihon Needs International is committed to delivering the highest quality products and services to its customers. Whether you are looking for a solution to improve the performance of your existing systems or are looking to upgrade your tubing connections, the PISCO Tube Fitting Chemical is an excellent choice that can provide long-lasting results. All polyphenylene sulphide (PPS) resin fittings are best suitable for applications with chemicals. These fittings, made of all PPS (except the seals), possess excellent heat and chemical resistance and are noncombustible. The seal is made of fluorine rubber, to meet a wide variety of applications. No need to worry about rust because the fitting is all resin made. Non-lubricated specification is suitable for food related application. The weight is about 1/3 of standard fittings. Sealing materials: Fluorine, EPDM or NBR Warning 1- Check chemical resistance before using the products, when the fluid medium is chemicals, solvent or mixed gases. Depending on the conditions, it may cause damage to the products, the escape of tubes, and a fluid leakage. 2- When the fluid medium is water or liquid, do not use fittings unless the operating environment meets all the described specifications in the catalog. Otherwise, it may cause damage to the products, the escape of tubes and a fluid leakage. 3- This series has seal rubber material options, but there is no way to identify between each material. Store each product properly not to mix up, after opening their packages. Caution 1- PPS resin has a characteristic of color change by being exposed to sunlight, fluorescent light, mercury lamp, high temperatures and etc. for a long term. There is no problem on the product performance for the color change. 2- Taper thread is not coated with Sealock. When coating the thread with seal tape or sealant, do not coat 1.5 to 2 screw ridges from the tip of the thread. See below figure.. 3- Tighten taper thread by hand until it stops, then use a spanner to tighten it about 2 or 3 more turns. Excessive tightening may break the thread part. Inadequate tightening may cause a loosened thread or a fluid leakage. 4- Resin type taper thread may have a fluid leakage or get loosened caused by “creep phenomena”, due to a long term use of the thread. Check the tightening condition periodically and re-torque the thread in case of leaks. If re-torque of the thread does not solve a leakage problem, change it to a new product. 5- Due to the resin-made collet, there is a possibility that the hard type tubes and the stem type of non-Chemical Series may have a problem of escape. Verify the matching of connections before using the products. 6- Unequal Union Stem (APIG) is the specialized stem type for Tube Fitting Chemical Series only. Since PPS of this series contains 30% of GF (glass fiber), it may have a problem of escape with non-Chemical Series. 7- Tube insertion into this product is tighter than that of Tube Fitting Standard Series due to its oil-free specification. Make sure to insert tube up to tube end. When inserting a tube, put a liquid like water on the tube, which does not affect the product and the tube. It will improve the smoothness of tube insertion. 8- The seal rubber material EPDM is not suitable for general air pipings, due to its inferior durability against mineral oil. Warnings 1- Make sure to follow the instructions below when the fluid medium is water or liquid. 2- Surge pressure must be controlled lower than max. operating pressure when using water or liquid as a fluid medium. 3- Tap water in Japan free from foreign substances or contamination can be used. Carry out the evaluation under an actual operating condition for using other kind of water. 4- Be sure to place Insert Ring (WR) into the tube edge when using water or liquid as a fluid medium. 5- The specification above may not be applied, depending on the kind of chemicals or mixed gases used as fluid medium. Make sure to use PISCO products after verifying their suitability on the user side.

Nihon Needs International Company is a leading supplier of industrial equipment, tools, and accessories based in Japan. One of their most popular products is the Nagano Keiki pressure gauges, which are widely used in a variety of industries, including oil and gas, chemical processing, and manufacturing. These pressure gauges are known for their accuracy, reliability, and durability, making them an ideal choice for critical applications where precise pressure measurement is essential. The Nagano Keiki pressure gauges come in a wide range of sizes and styles to meet the diverse needs of different industries. They are available in both analog and digital formats and can measure pressures ranging from a few psi to several thousand psi. Additionally, these gauges are designed to withstand harsh environments, such as high temperatures, corrosive chemicals, and vibration, ensuring accurate readings even in the most challenging conditions. Nihon Needs International Company provides Nagano Keiki pressure gauges to customers worldwide, offering competitive pricing, fast shipping, and excellent customer support. Their team of experts can help customers select the right pressure gauge for their specific application and provide technical assistance and maintenance services to ensure optimal performance and longevity. Moreover, Nihon Needs International Company is committed to quality and safety, and all their products, including Nagano Keiki pressure gauges, undergo rigorous testing and certification before they are released to the market. This ensures that customers receive only the highest quality and most reliable products, and that they can be confident in their safety and performance. In conclusion, Nihon Needs International Company is a trusted supplier of Nagano Keiki pressure gauges, providing customers with high-quality, reliable, and accurate pressure measurement solutions for their critical applications. With their vast selection of gauges, competitive pricing, and excellent customer support, Nihon Needs International Company is the go-to source for Nagano Keiki pressure gauges in Japan and worldwide. These pressure gauges are constructed to use a liquid filled between the diaphragm seal and element as the pressure transmission medium. Our catalog introduces pressure indicator gauges, pressure gauges with electric contact, pressure switches, differential pressure gauges, differential pressure gauges with electric contact, and differential pressure switches. Since the diaphragm seal and bottom flange of the wetted part can be selected to match the application, these gauges are applicable to measurement of highly corrosive fluids, high viscosity fluids, and fluids which are mixed with solids or which solidify easily. Feature ･A highly corrosion resistant diaphragm is used at the diaphragm seal so that high viscosity fluids, as well as highly corrosive fluids, can be measured. ･When the diaphragm is welded, its surface can be easily cleaned by loosening the case mounting bolt. ･A zero adjustment pointer is used, and temperature error, elevation error, and other errors can be easily corrected. ･The danger of leaking of the filled liquid has been reduced by adopting a welded type diagram. (Except some diaphragm materials)