Description

Nihon Needs International is a leading company in Japan that specializes in providing high-quality industrial products and services. One of their key products is the PISCO Tube Fitting Chemical, which is an innovative solution for ensuring leak-free connections in various types of tubing systems. This product is designed to be highly reliable, durable, and resistant to chemical and environmental factors, making it ideal for use in a wide range of industrial applications. The PISCO Tube Fitting Chemical is specifically designed to provide a strong and secure connection between tubing and other components in a system. This product features a unique design that ensures a tight seal between the tube and the fitting, preventing leaks and ensuring efficient operation. The fitting is made from high-quality materials that are resistant to corrosion and other environmental factors, making it suitable for use in harsh industrial environments. Additionally, the PISCO Tube Fitting Chemical is easy to install and requires minimal maintenance, which helps to reduce downtime and increase productivity. One of the key advantages of using the PISCO Tube Fitting Chemical is its ability to maintain a secure connection even in applications where there is high pressure or extreme temperature conditions. This is due to the fact that the fitting is designed to expand and contract with the tube, ensuring that it remains securely in place even under the most challenging conditions. Additionally, the PISCO Tube Fitting Chemical is compatible with a wide range of tubing materials, making it a versatile solution that can be used in many different applications. Overall, the PISCO Tube Fitting Chemical is an innovative and reliable solution that can help to improve the efficiency and effectiveness of various industrial systems. As a trusted provider of this product, Nihon Needs International is committed to delivering the highest quality products and services to its customers. Whether you are looking for a solution to improve the performance of your existing systems or are looking to upgrade your tubing connections, the PISCO Tube Fitting Chemical is an excellent choice that can provide long-lasting results. All polyphenylene sulphide (PPS) resin fittings are best suitable for applications with chemicals. These fittings, made of all PPS (except the seals), possess excellent heat and chemical resistance and are noncombustible. The seal is made of fluorine rubber, to meet a wide variety of applications. No need to worry about rust because the fitting is all resin made. Non-lubricated specification is suitable for food related application. The weight is about 1/3 of standard fittings. Sealing materials: Fluorine, EPDM or NBR Warning 1- Check chemical resistance before using the products, when the fluid medium is chemicals, solvent or mixed gases. Depending on the conditions, it may cause damage to the products, the escape of tubes, and a fluid leakage. 2- When the fluid medium is water or liquid, do not use fittings unless the operating environment meets all the described specifications in the catalog. Otherwise, it may cause damage to the products, the escape of tubes and a fluid leakage. 3- This series has seal rubber material options, but there is no way to identify between each material. Store each product properly not to mix up, after opening their packages. Caution 1- PPS resin has a characteristic of color change by being exposed to sunlight, fluorescent light, mercury lamp, high temperatures and etc. for a long term. There is no problem on the product performance for the color change. 2- Taper thread is not coated with Sealock. When coating the thread with seal tape or sealant, do not coat 1.5 to 2 screw ridges from the tip of the thread. See below figure.. 3- Tighten taper thread by hand until it stops, then use a spanner to tighten it about 2 or 3 more turns. Excessive tightening may break the thread part. Inadequate tightening may cause a loosened thread or a fluid leakage. 4- Resin type taper thread may have a fluid leakage or get loosened caused by “creep phenomena”, due to a long term use of the thread. Check the tightening condition periodically and re-torque the thread in case of leaks. If re-torque of the thread does not solve a leakage problem, change it to a new product. 5- Due to the resin-made collet, there is a possibility that the hard type tubes and the stem type of non-Chemical Series may have a problem of escape. Verify the matching of connections before using the products. 6- Unequal Union Stem (APIG) is the specialized stem type for Tube Fitting Chemical Series only. Since PPS of this series contains 30% of GF (glass fiber), it may have a problem of escape with non-Chemical Series. 7- Tube insertion into this product is tighter than that of Tube Fitting Standard Series due to its oil-free specification. Make sure to insert tube up to tube end. When inserting a tube, put a liquid like water on the tube, which does not affect the product and the tube. It will improve the smoothness of tube insertion. 8- The seal rubber material EPDM is not suitable for general air pipings, due to its inferior durability against mineral oil. Warnings 1- Make sure to follow the instructions below when the fluid medium is water or liquid. 2- Surge pressure must be controlled lower than max. operating pressure when using water or liquid as a fluid medium. 3- Tap water in Japan free from foreign substances or contamination can be used. Carry out the evaluation under an actual operating condition for using other kind of water. 4- Be sure to place Insert Ring (WR) into the tube edge when using water or liquid as a fluid medium. 5- The specification above may not be applied, depending on the kind of chemicals or mixed gases used as fluid medium. Make sure to use PISCO products after verifying their suitability on the user side.