Products

Despite being compact and lightweight, this reel provides a long stroke of up to 4m (winding length). Due to the use of a cylindrical drum, the tension (winding force) increases gradually as the wire rope is pulled out. The cylindrical drum also prevents cable jamming even when you pull out the wire rope in an oblique direction. Balance is obtained at the preset height and the wire rope is wound up after being pulled out again. The models with the ratchet mechanism (ER-3A, 5A, 10A) can be stopped even during strokes.

Kito Chain Block Pull your weight – and way more. The CB proves its unmatched pulling power in the most extreme conditions. Exceptional, heavy-grade components make this a long lasting workhorse that tackles severe -40˚ C temperatures and truly hostile Northern winters.

ENDO Spring Balancers are a valuable addition to your assembly shop, body shop and many other industries. They support heavy tools with cable tension equal to the weight of the suspended tools, which makes them seem virtually "weightless".

We "NEEDS INTERNATIONAL" are authorized distributor of "KITO JAPAN" for Electric Chain Hoist, The ER2 electric hoist is designed for peak performance—even on the toughest jobs in the toughest conditions. Its quiet operation and minimal vibration lowers workplace noise pollution, helps reduce worker fatigue and extends the life of the hoist. Practical durability at its best, the ER2 lets you get the job done safely and worry-free.

These open-end wrenches have been designed for convenience in tightening pipes and tube nuts, which is difficult with ordinary wrenches.

Operated by compressed air, Air Hoist can be used for loading and unloading, and transport. The control push button is pressure sensitive. By changing how hard you press the button, you can adjust the operating speed continuously from low to high. 　 Note: Type EHL is equipped with a pull cord as standard. The push button is also available.

TurboLap filers are ideal tools for deburring or finishing ribs, slots, and other intricate parts. An economical air filer well suited for any mold and die shop's polishing bench. The patented, turbodrive mechanism provides high speed and torque in either a linear or eliptical "swing" motion. The linear-stroke is designed for draw-filing narrow areas; the swing stroke provides a unique eliptical stroke well suited for finishing side walls at bottoms of mold cavities. Choose a fixed stroke of 0.3, 0.7, or 1.2mm. Stroke frequency is controlled by means of a ring throttle. The design of the TurboLap is light and well balanced using an ergonomic, soft grip housing for comfort. Air exhausts out the back overhose providing a relatively quiet 59-72dB(A) noise level. Commonly used with ceramic Super Stones or diamond coated tapered machine files. The most common model TurboLap sold is TLL-07. Made in Japan. NOTE: Only the TLL-07 is stocked, all other models have a 7-10 day delivery. Features: • Fixed Stroke Lengths: 0.3 / 0.7 / 1.2mm (0.012" / 0.028" / 0.047") • Tool Holder Capacity: 1/8" diameter, 1/8" x 3/8" stones • Tool Dimensions: 7/8" to 1.1" diameter x 8½" long • Weight: 180g (6.4oz.) • Recommended Air Pressure: 6.3 bar (90psig) • Use with Filter/Regulator unit (AW20). No oil needed. Accessories included with TurboLaps: • Ceramic Super Stone (1x6x50mm - Blue) • 1.5mm Air intake Hose (U4025) • Exhaust Overhose (U4027) • Air Fitting - 1/4NPT (U4026) • Tool Holder (T0513) and Hex Wrench (T2649) Available Model : TLL-03 TLL-07 TLL-12 TLS-03 TLS-07 TLS-12

Product Description: Overload Protector: Advantages It can check the hydraulic pressure of cylinder inside the slider It can let the hydraulic pressure of cylinder released within 3/1000 seconds immediately When happening overload, it will release the electric signal and let the machine stop working Air driven hydraulic pump can supply the hydraulic pressure of cylinder quickly Overload protector have pressure control valve, which can adjust hydraulic pressure caused by the oil temperature arising automatically We hold immense expertise in catering to the variegated requirements of the customers by offering them Sandsun Pump Replacement Services. Utilizing quality-approved raw-material sourced from the certified vendors of the market, this range is made as par the international quality parameters. Understanding the distinctive requirements of these products, we are availing this range in various specifications and dimensions. Under this range, we also offer the following products: Hydraulic overload pump for press Air driven hydraulic pump Die clamp Quick die change systems Quick mold change systems Hydraulic high pressure booster Mould Clamp Following are the models of Sandsun in which our offered range is available: VA08-560 VS08-560 VA08-760 VS08-760 VA08-960 VS08-960 VA12-560 VS12-560 VA12-760 VS12-760 VA12-960 VS12-960 PB08 PC12

UHT air grinders have been the grinder of choice for tool rooms, deburring benches, and model shops. This slim, pencil-shaped air grinder has a lot of power and air exhausts thru the rear overhose. The uniquely slim design of this 45° angled head allows users to reach areas otherwise inaccessible with other angled grinders. Max. Speed: 53,000 rpm Air consumption: 4.2 cfm at recommended air pressure of 85 psi Airline filter/oiler unit required for warranty, # AC20A Pin & Wrench to loosen nut spindle No collets Dimensions: 5/8" dia.body, 3/4" dia. x 2-1/4" long head Available imodels: Angle Grinder MAG-121 Angle Grinder MAG-123 Angle Grinder MAG-093 Angle Grinder MAG-122 Angle Grinder MAG-091

We "NEEDS INTERNATIONAL" are authorized distributor of "UHT CORPORATION- Japan" UHT Make air grinders have been the grinder of choice for tool rooms, deburring benches, and model shops. This slim, pencil-shaped air grinder has a lot of power and air exhausts thru the rear overhose. It also features a twist ring throttle at the end of the tool for speed control. Models: MSG-32BSN - 1/8" Spindle MSG-3BSN - 3.0mm Spindle Max. Speed: 65,000 rpm Air consumption: 4.2 cfm at recommended air pressure of 85 psi Airline filter/oiler unit required for warranty, # AC20A Pin & Wrench to loosen nut No collets Dimensions: 5/8" dia. x 6" long Accessories included with Ushio air grinders: • 1.5mm Air intake Hose (U4025) • Exhaust Overhose (U4027) • Air Fitting - 1/4NPT (U4026)